Operate Multi-Function Control [Multi] - JRC JMA-5212-4/6 User Manual

Hide thumbs Also See for JMA-5212-4/6:

Table of Contents

3.5.18 Operate Multi-Function Control [MULTI]

The multi-function control [MULTI] is provided to change the settings of parameters such as the length of

radar trails. Turn the control to select a parameter. Radar operation is simplified by using the control.

[I] Initial Setting (Multi Dial Setting)

Set parameters that can be operated with the multi-function control.

A parameter set to ON can be called by turning [MULTI] control.

Press [RADAR MENU] key twice.

Press [8] key.

Press [2] key.

The Multi Dial Setting Menu will appear.

Press the numeric key of the number of

the parameter whose setting is to be

The setting will be switched between ON

ON : Can be operated with the multi-function

OFF : Cannot be operated with the

multi-function control.

1. Vector Length:

2. Trails Length:

3. TT TGT Display No.:

4. C-UP Angle:

5. Own Track Color:

6. Mark/Line Color:

Vector length of TT

Length of radar trails

TT target number for which values are to be

Course in course-up mode bearing mode

Available with plotter option.