Noise Level Adjustment (Noise Level) - JRC JMA-5212-4/6 User Manual

7.4.1 Noise Level Adjustment (Noise Level)

[I] Noise Level Adjustment for Signal Processing
Procedure 1
2
3
4
5
6
7
Note: The noise level is factory-set.
After system installation, a great change in the noise level adjustment value should be avoided; it
should be fine adjusted within r5.
Exit 1
Hold down [RADAR MENU] key.
The Code Input Menu will appear.
Press [0] key.
Move the cursor onto the "ENT" button
in the Code Input menu, and press
[ENT] key.
The Adjust Menu will appear.
When the Adjust Menu appears, press
[8] key.
The SP/TT INIT Setup Menu will appear.
Press [1] key.
The Noise Level Menu will appear.
Press [1] key.
The Code Input Menu will open to change the noise level value.
Change the value to display echo correctly.
In addition to the entry on the Code Input menu, the Multi-functional Dial Control is
available to change the value.
Press [RADAR MENU] key.
The Main Menu will reappear.
7 39