If You Replace The Main Pcb - Konica Minolta Bizhub 20p Service Manual

1. IF YOU REPLACE THE MAIN PCB

■ What to do when replacing the main PCB
- Setting the default paper size.
- Setting the serial number.
■ What you should prepare
(1) Computer (Windows
Create the "bizhub" folder in the C drive.
(2) USB cable (one piece)
(3) Setting file of the default paper size, for example (s5200U.bin):
Extract this file to set the default paper size.
(4) BrUsbsn.exe file
Copy it into the "bizhub" folder that has been created in the C drive. Extract the copied
file and run the BrUsbsn.exe file by double-clicking.
CAUTION :
• Make sure that the printer driver for bizhub 20P is installed to the computer.
®
XP/2000 or later)
8-1
Confidential