Download Print this page

Advertisement

■ REPLACE PF KIT1 (2, 3, MP)
PF kit 1 (2, 3, MP) is the time for replacement.
Step
PF kit 1 (2, 3, MP) is the time for
1
replacement
■ SIZE ERROR DUPLEX
Specified paper size is not supported for duplex printing.
<User Check>
- Specify the paper size to A4/LETTER/FOLIO.
■ SIZE MISMATCH
Mismatch between specified paper size from the driver and setting paper in the tray.
<User Check>
- Match specified paper size from the driver with setting paper in the tray.
■ STORAGE FULL
Memory full.
<User Check>
- Install additional DIMM memory.
Step
1
Main PCB ASSY failure
■ TOO MANY TRAYS
Option tray is installed more than three.
<User Check>
- Install the option tray to less than two.
Step
1
Connector: 54702-1219 failure
2
Main PCB ASSY failure
Cause
Cause
Cause
3-22
Remedy
Replace the PF kit 1 (2, 3, MP) and reset
the counter.
Remedy
Replace the main PCB ASSY.
Remedy
Replace the connector: 54702-1219.
Replace the main PCB ASSY.
Confidential

Advertisement

Table Of Contents

Troubleshooting

   Also See for Konica Minolta Bizhub 20p

   Related Manuals for Konica Minolta Bizhub 20p

Comments to this Manuals

Symbols: 0
Latest comments: