Gear Plate Calking Assy/Develop Joint/Main Motor Assy - Konica Minolta Bizhub 20p Service Manual

8.11 Gear Plate Calking ASSY/Develop Joint/Main Motor ASSY

(1) Place the printer body so that the Frame L is at the top.
(2) Remove the eight bind B M4x12 Taptite screws and one cup S M3x6 taptite screw.
(3) Remove the Gear plate calking ASSY from the Frame L.
Note:
• Be careful not to drop the gear.
Taptite, bind B M4x12
Taptite, bind B M4x12
Taptite, cup S M3x6
Gear plate calking ASSY
Under FG wire
Frame L
Fig. 5-44
5-40
Confidential