Download Print this page


3.2.4 Paper eject

After the printing image on the exposure drum is transferred onto the paper, the paper is fed
to the fuser unit to fix unfixed toner onto the paper by the heat roller and the pressure roller in
the fuser unit.
Afterwards, the paper is ejected from the fuser unit. The paper eject actuator detects
whether the paper is ejected correctly or not.
After the paper exits from the heat roller, the paper is turned by the outer chute and ejected
face down into the top output tray through the eject roller ASSY 2.
Eject roller ASSY 2
Outer chute
Eject roller ASSY 1
Heat roller
Paper eject actuator
Pressure roller
Fig. 2-9
When a paper jam occurs, the main motor rotates conversely to throw out the engagement of
the gear. Consequently, the eject roller ASSY 2 is released so that the jammed paper is
removed easily.




   Also See for Konica Minolta Bizhub 20p

   Related Manuals for Konica Minolta Bizhub 20p

Comments to this Manuals

Symbols: 0
Latest comments: