Distinguish Error Cause; Led Indication; Led Indication At Operator Calls - Konica Minolta Bizhub 20p Service Manual

Hide thumbs Also See for Bizhub 20p:
Table of Contents

Advertisement

2. DISTINGUISH ERROR CAUSE

2.1

LED indication

2.1.1 LED indication at Operator Calls

Distinguish the contents of message by LED indication in the control panel. See the
reference page and take the corrective action described for each indication to correct it. when
the red Error LED is ON or blinking to indicate it, the machine automatically recovers from
most errors. But some of errors are necessary to reset the machine by holding down the [Go]
button.
LED indication of the following table is that
LED is OFF,
LED
Back
Cover
Toner
Drum
Paper
Status
Status : Red light ON
Back
Cover
Toner
Drum
Paper
Status
Status : Red light ON
The Back Cover
LED will turn on for
0.5 seconds and
off for 0.5 seconds
LED is ON and
Type of error
Front cover is opened
Memory full
Option tray is installed too much
Print overrun
Fuser cover is opened
Duplex unit is not set
3-5
LED is blinking.
Error clearance
by pressing the
[Go] button
No
Yes
No
Yes
No
Yes
Refer to:
3-17
3-20
3-22
3-21
3-18
3-17
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents