Toner Led Pcb Unit Assy - Konica Minolta Bizhub 20p Service Manual

8.28 Toner LED PCB Unit ASSY

(1) Remove the pan B M3x8 Taptite screw, and remove the Regist ground spring.
(2) Remove the Toner LED PCB unit ASSY from the Frame R.
Toner LED PCB unit ASSY
Pan B M3x8 Taptite screw
Assembling Note:
• Hang the Hook of the Regist ground spring on the Pinch spring and hang the ring part of
the Regist ground spring on the Pin, and secure the end part and the Toner LED PCB
unit ASSY to the Frame R with the screw.
Toner LED PCB unit ASSY
Pan B M3x8 Taptite screw
Frame R
Hook
Frame R
Regist ground spring
Fig. 5-86
Pin
Fig. 5-87
5-64
Pins
<Right side>
Hook
Pinch spring
Regist ground spring
Confidential