Download Print this page

Konica Minolta Bizhub 20p Service Manual: Roller Holder Assy

Hide thumbs

Advertisement

8.35 Roller Holder ASSY

(1) Push the Lift arm to the direction of 1a and pull out the pin of the Roller holder ASSY.
Then, turn the Roller holder ASSY to the direction of 1b.
(2) Slide the Roller holder ASSY to the direction of 2a. Then, lift up the gear side of the
Roller holder ASSY to the direction of 2b and pull it out to the direction of 2c to remove.
Assembling Note:
• When assembling the roller holder ASSY, align the section "A" on the shaft of the roller
holder ASSY with the hole on the paper feed frame.
Lift arm
Paper feed frame
Pin
Roller holder ASSY
Paper feed frame
1b
1a
Fig. 5-111
Roller holder ASSY
2c
2b
Fig. 5-112
5-78
"A"
2a
Confidential

Advertisement

Table Of Contents

Troubleshooting

   Also See for Konica Minolta Bizhub 20p

   Related Manuals for Konica Minolta Bizhub 20p

Comments to this Manuals

Symbols: 0
Latest comments: