Image Position Adjustment; If You Forget The Administrator Password - Konica Minolta bizhub PRO 1100 Quick Manual

6.6

Image Position Adjustment

The previously adjusted image position may be misaligned by a slight enlargement or reduction of paper that is caused
due to a change in ambient temperature or humidity, a change of the machine conditions, usage of a different type of
paper, or heat impact of the Fusing Unit.
In this case, adjust the image position (Both Sides Adjustment) again.
Reference
For details, refer to page 5-1.
6.7

If you forget the administrator password

The administrator password is set to "00000000" by factory default.
If the administrator password is changed, contact your service representative.
bizhub PRO 1100
6
6-15