Download Print this page

Advertisement

■ Downward fogging of solid color
Step
Cause
Toner sensor
failure
1
HVPS PCB
2
failure
Main PCB failure Is the problem solved
3

■ Horizontal lines

Step
Cause
Dirt on charged
1
electrode
Paper tray
ground terminal
2
provided in
machine body
Laser unit failure
3
<User Check>
- Toner may be empty. Replace the toner cartridge with a new one.
Check
Is the toner sensor
performed normally by
following the procedure
in
"Factory Inspection
Mode" in 1.3 Service
Mode in Chapter
Is the problem solved
after replacing the
HVPS PCB ASSY?
after replacing the main
PCB ASSY?
<User Check>
- The paper tray ground terminal provided in the machine
body may be dirty. Clean the contact with a dry cloth.
Check
Are the electrodes on
the drum unit and
machine body dirty?
Is the paper tray ground
terminal bent, which is
provided in the machine
body?
Is the problem solved
after replacing the laser
unit?
3-44
Result
Replace the toner sensor
PCB unit ASSY and the
toner LED PCB ASSY.
No
6.
Replace the HVPS PCB
Yes
ASSY.
Replace the main PCB
Yes
ASSY.
Result
Clean both electrodes.
Yes
(Refer to
Correct bending of paper
tray ground terminal.
Yes
Replace the laser unit.
Yes
Remedy
Remedy
Fig. 3-2, Fig.
3-3.)
Confidential

Advertisement

Table Of Contents

Troubleshooting

   Also See for Konica Minolta Bizhub 20p

   Related Manuals for Konica Minolta Bizhub 20p

Comments to this Manuals

Symbols: 0
Latest comments: