5.5
Hue Adjustment
5.5
Hue Adjustment
Various problems, for example, the current hue is different from the previous one or the expected chromog-
enic effect has not been obtained, are caused due to a change in ambient temperature or humidity, a change
of the machine conditions, or a change of the color tone by the paper type or print mode.
To reproduce stable colors, in addition to regular calibration for the controller, use other image quality adjust-
ments as necessary, such as when changing screens or papers or when hue is important.
This machine provides the following three types of quality adjustment flows:
-
Adjustment flow when changing the screen
-
Regular adjustment flow: Normal
-
Regular adjustment flow: High Precision
d
Reference
For details about the Image Controller IC-605, refer to the [HTML User's Guide].
For details about the Image Controller IC-417 and Image Controller IC-313, refer to the Fiery color server
user's guide.
For details about the Image Controller IC-314, refer to the Creo color server user's guide.
5.6
Image Position Adjustment
The previously adjusted image position may be misaligned by a slight enlargement or reduction of paper that
is caused due to a change in ambient temperature or humidity, a change of the machine conditions, usage
of a different type of paper, or heat impact of the Fusing Unit.
In this case, adjust the image position (Both Sides Adjustment) again.
d
Reference
For details, refer to the [HTML User's Guide].
5.7
If you forget the administrator password
For details about the default administrator password, refer to [Safety Information].
If the administrator password is changed, contact your service representative.
AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L
5
5-17