Paper feeding kit for tray 1, 2, 3
1.2.2
< Uninstalling Procedure >
Check that the following before entering the procedures.
• Make sure that the AC cord is disconnected from the printer.
• Make sure that the Paper tray is removed from the printer.
• Make sure that the Drum/toner ASSY is removed.
• Make sure that the Duplex feed ASSY is removed.
(1) Pull up the back side of the Separation pad ASSY.
(2) Push the Hooks provided on both sides of the Separation pad ASSY inwards.
(3) Pull up the Separation pad ASSY.
(4) Remove the Separation pad spring.
Separation pad spring
Hooks
Hook
2
1
Fig. 4-35
Separation pad ASSY
2
Hook
3
4-24
<Front side>
Paper tray
Confidential