Download Print this page

Advertisement

8.26 LVPS PCB Unit

(1) Turn the Printer upside down.
(2) Remove the five bind B M4x12 Taptite screws, and then remove the Base plate LV.
(3) Remove the Screw pan (S/P washer) M3.5x6 from the Base plate LV to remove the PS
PCB unit terminal.
Taptite bind B M4x12
Base plate LV
<Back side>
Assembling Note:
• When assembling the Base plate LV, Direct the cable side of the PS PCB unit terminal
to the backward (Fig. 5-92: To the direction of an arrow of the enlarged illustration.), and
align parallel the PS PCB unit terminal with the side of the Base plate LV.
Taptite bind B M4x12
Screw pan (S/P washer) M3.5x6
Fig. 5-76
5-58
PS PCB unit terminal
Confidential

Advertisement

Table Of Contents

Troubleshooting

   Also See for Konica Minolta Bizhub 20p

   Related Manuals for Konica Minolta Bizhub 20p

Comments to this Manuals

Symbols: 0
Latest comments: