Electrical Properties; Power Source; Power Consumption - Konica Minolta Magicolor 3300 Service Manual

2. Electrical Properties

2.1 Power Source

Two types of power source as follows are available for this printer, which are selected according to the
specifications.
100V/120V printer:Voltage: 100-127VAC ±10% (90 ~ 140V), frequency: 50/60Hz ± 3Hz
220/240V printer:voltage: 220-240VAC ±10% (198 ~ 264V), frequency: 50/60Hz ± 3Hz

2.2 Power Consumption

Power consumption in each operation mode at rated voltage input
Operation mode
Printing mode
(Running mode)
READY mode
(Ready mode)
ENAGISTAR mode *2
*1 At running mode : wattage per hour at printing continuously.
At ready mode : wattage per hour at the temperature of fuser ready.
*2 Fuser is in stop status.
8-496
Average (Wh/h) *1
≤
600W
≤
180W
-
Max. power consumption
≤
900W
(Fuser is on)
≤
900W
(Fuser is on)
≤
45W
(Controller is included)