Konica Minolta Magicolor 3300 Service Manual page 177

Konica minolta magicolor 3300 laser printer service manual

Hide thumbs Also See for Magicolor 3300:

Table of Contents

Pull out the CASSETTE from the printer.

Remove the CASSETTE ASSY FRONT. (RRP2.3)

Remove the ROLL ASSY RETARD. (RRP2.1)

Pull out the CLUTCH ASSY FRICTION (PL2.1.3) on the SHAFT RETARD from the CASSETTE.

Release the hook of the SPRING RETARD (2.1.4) hitched to the bottom groove of the HOLDER

RETARD from the CASSETTE.

Release the hook at 1 position securing the top portion of the HOLDER RETARD from the CASSETTE

and move the HOLDER RETARD leftward.

Pull out the right end of the HOLDER RETARD slightly from the CASSETTE and extract the HOLDER

RETARD and remove.

Replace the components in the reverse order of removal.

Chapter 3 Removal and Replacement Procedures

Troubleshooting