Konica Minolta Magicolor 3300 Service Manual page 211

Removal
1) Pull out the CASSETTE from the printer.
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER SIDE L. (RRP1.14)
4) Remove the COVER SIDE R. (RRP1.9)
5) Remove the CHUTE ASSY TURN. (RRP3.1)
6) Remove the LINK ACTUATOR (RRP 3.17).
7) Remove the COVER CST SLIDE. (RRP3.2)
8) Remove the FEEDER ASSY UNIT. (RRP3.3)
9) Remove the PICKUP ASSY. (RRP3.12)
10) Turn up the PICKUP ASSY (PL3.3.1).
11) Release the hook at 1 position securing the ACTUATOR NO PAPER to the PICKUP ASSY and extract
the left side shaft of the ACTUATOR NO PAPER.
12) Pull out the ACTUATOR NO PAPER left upward from the PICKUP ASSY.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-211