Konica Minolta Magicolor 3300 Service Manual page 275

Removal
1) Remove the FUSER ASSY. (RRP8.1)
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
4) Remove the COVER MSI. (RRP1.11)
5) Remove the TRAY ASSY BASE. (RRP1.12)
6) Remove the COVER ASSY FRONT. (RRP1.13)
7) Remove the COVER ASSY FRONT IN. (RRP1.10)
8) Remove the CHUTE ASSY EXIT. (RRP7.1)
9) Remove the COVER SIDE L. (RRP1.14)
10) Remove the COVER SIDE R. (RRP1.9)
11) Remove the STRAP. (RRP8.6)
12) Remove the CHUTE ASSY OUT. (RRP6.1)
13) Remove the SOLENOID FEED MSI. (RRP6.2)
14) Remove the SENSOR ASSY MEDIA. (RRP6.15)
15) Remove the SHAFT ASSY ROLL FEED. (RRP6.13)
16) Remove 2 screws securing the PLATE OUT MSI (PL6.1.35) to the CHUTE ASSY OUT (PL6.1.1).
In the following steps, shift the actuator of the ACTUATOR MSI (PL6.1.37) from a bore
in the PLATE ASSY BOTTOM MSI (PL6.1.42).
17) Remove the PLATE OUT MSI from the CHUTE ASSY OUT together with the PLATE ASSY BOTTOM
MSI.
18) Remove the PLATE ASSY BOTTOM MSI from the PLATE OUT MSI.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-275