Konica Minolta Magicolor 3300 Service Manual page 189

Removal
1) Pull out the CASSETTE from the printer.
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER SIDE L. (RRP1.14)
4) Remove the COVER SIDE R. (RRP1.9)
5) Remove the CHUTE ASSY TURN. (RRP3.1)
6) Remove the COVER CST SLIDE. (RRP3.2)
7) Remove the FEEDER ASSY UNIT. (RRP3.3)
8) Remove the FEEDER ASSY. (RRP3.1)
9) Remove 4 screws securing the SUPPORT FEEDER LEFT to the PLATE BOTTOM.
10) Pull down the HOUSING ASSY FEEDER R inward and extract the hooks at 3 positions out of the hole
at the PLATE BOTTOM.
11) Remove the HOUSING ASSY FEEDER R upward from the PLATE BOTTOM.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-189