Operation Of Eeprom - Konica Minolta Magicolor 3300 Service Manual

2.7 Operation of EEPROM

Click the [EEPROM] button, and the screen will appear where [NV Data] tab is selected.
From this screen, the dialog related to the NVM (Non-Volatile Memory) is executed.
2.7.1 Direct Read/Write
The [Address] field and [Data] field are displayed on the screen where [NV Data] tab is selected. Entering
address and data here allows you to directly read/write the desired NVM area.
This file is intended to be used by a KONICA MINOLTA PRINTING SOLUTIONS Level 3
Technical Support Engineer to diagnose problems with data in the NVRAM. Refer to the
NVM Readme.txt file in the folder where the Hibana Service Commander was installed.
Direct Read
1) Enter arbitrary address in the Address field, and press the [Enter] key.
2) The result is displayed in the information display area.
Successful terminationRead: XXXX (Address) - XX (Data)
Read inhibited areaRead: XXXX (Address) - The address does not exist.
Direct Write
1) Enter arbitrary address in the Address field, and desired data in the Data field, then press the [Enter]
key.
2) The result is displayed in the information display area.
Successful terminationWrite: XXXX (Address) - XX
Read onlyWrite: XXXX (Address) - It is a write-in prohibition address.
The address and data to be entered are hexadecimal numbers. The result is displayed
also with hexadecimal numbers.
2-130