Konica Minolta Magicolor 3300 Service Manual page 109

P11 "White flake"
A part of image is missing and it becomes flake.
Initial check
Parts of different specifications, improper installation, damage, deformation, dirt, foreign substance
attached, etc.
∇ Major parts to be checked ∇
BTR ASSY
Item
Check paper
1
Are recommended size and type of paper used?
Check the transfer condition for duplex printing.
2
Check the transfer condition specified by ESS.
Condition / initial check
Check
Chapter 1 Troubleshooting
Remedy
Change paper
Use the recommended size and type of
paper.
Check printer driver.
Set the appropriate printing condition by
ESS.
1-109