Konica Minolta Magicolor 3300 Service Manual page 239

Konica minolta magicolor 3300 laser printer service manual

Hide thumbs Also See for Magicolor 3300:

Table of Contents

Release the latch at A from the printer and open the CHUTE ASSY IN (PL5.1.1).

Remove the BTR UNIT ASSY. (RRP8.4)

Remove the connector (P/J142) on the SENSOR TONER FULL from the CHUTE ASSY IN of the

Release the hooks at 2 positions securing the SENSOR TONER FULL to the CHUTE ASSY IN with a

mini screwdriver or the like.

Remove the SENSOR TONER FULL from the CHUTE ASSY IN.

Replace the components in the reverse order of removal.

Chapter 3 Removal and Replacement Procedures

Troubleshooting