Removal
1)
Pull out the CASSETTE from the printer.
2)
Remove the CHUTE ASSY TURN. (RRP3.1)
In the following steps, replace and remove the ROLL ASSY FEED, unilateral at a time,
to confirm the replacing direction of the ROLL ASSY FEED.
3)
Rotate the SHAFT FEED 1 (PL3.3.2) so that the rubber of the ROLL ASSY FEED faces downward
from the printer FEEDER.
4)
Release the hook securing the ROLL ASSY FEED to the SHAFT FEED 1 and remove the ROLL ASSY
FEED.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-205