Removal
1)
Remove the FUSER ASSY. (RRP8.1)
2)
Remove the BTR UNIT ASSY. (RRP8.4)
3)
Remove the COVER TOP MAIN. (RRP1.4)
4)
Remove the COVER ASSY FRONT HEAD. (RRP1.2)
5)
Remove the COVER MSI. (RRP1.11)
6)
Remove the TRAY ASSY BASE. (RRP1.12)
7)
Remove the COVER ASSY FRONT. (RRP1.13)
8)
Remove the CHUTE ASSY EXIT. (RRP7.1)
9)
Remove the COVER ASSY FRONT IN. (RRP1.10)
10) Remove the COVER SIDE L. (RRP1.14)
11) Remove the COVER SIDE R. (RRP1.9)
12) Remove the CHUTE ASSY OUT. (RRP6.1)
13) Remove the CHUTE ASSY IN. (RRP5.1)
14) Remove 2 screws securing the PWBA ASSY EARTH to the printer.
15) Remove the PWBA ASSY EARTH from the printer.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-341