Removal
1)
Open the COVER MSI (PL1.1.26) from the front of the printer.
2)
Deflecting the left side of the TRAY ASSY BASE (PL1.1.28) inward from the long hole on the left side
of the COVER MSI, extract the boss of the TRAY ASSY BASE from the long hole.
3)
Extract the right side boss of the TRAY ASSY BASE from the right long hole of the COVER MSI.
4)
Lowering the tip of the COVER MSI down the printer, pull out the COVER MSI forward and remove.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-167