Konica Minolta Magicolor 3300 Service Manual page 271

Removal
1) Remove the FUSER ASSY. (RRP8.1)
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
4) Remove the COVER MSI. (RRP1.11)
5) Remove the TRAY ASSY BASE. (RRP1.12)
6) Remove the COVER ASSY FRONT. (RRP1.13)
7) Remove the COVER ASSY FRONT IN. (RRP1.10)
8) Remove the CHUTE ASSY EXIT. (RRP7.1)
9) Remove the COVER SIDE L. (RRP1.14)
10) Remove the COVER SIDE R. (RRP1.9)
11) Remove the STRAP. (RRP8.6)
12) Remove the CHUTE ASSY OUT. (RRP6.1)
13) Release the hook of the SPRING SOL 0.5 (PL6.1.39) hitched on the convex portion on the STOPPER
SOL (PL6.1.38) from the left side surface of the CHUTE ASSY OUT (PL6.1.1).
14) Remove the connector (P/J132) of the SOLENOID FEED MSI from the CHUTE ASY OUT.
15) Remove 1 screw securing the SOLENOID FEED MSI to the CHUTE ASSY OUT.
16) Remove the SOLENOID FEED MSI from the CHUTE ASSY OUT.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-271