Konica Minolta Magicolor 3300 Service Manual page 267

Removal
1) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
2) Remove the COVER MSI. (RRP1.11)
3) Remove the TRAY ASSY BASE. (RRP1.12)
4) Remove the COVER ASSY FRONT. (RRP1.13)
5) Release the hook at one position securing the ROLL CORE MSI: RIGHT (PL6.1.26) to the SHAFT MSI
(PL6.1.28) on the CHUTE ASSY OUT (PL6.1.1) from the printer, and push down the PLATE ASSY
BOTTOM MSI (PL6.1.42) slightly to release the nip with the ROLL ASSY FEED MSI (PL6.1.27).
6) From the printer, push down the PLATE ASSY BOTTOM MSI (PL6.1.42) on the CHUTE ASSY OUT
and release the nip with the ROLL ASSY FEED MSI (PL6.1.27).
7) Slide the ROLL ASSY FEED MSI rightward from the SHAFT MSI and pull out the ROLL ASSY FEED
MSI toward the front.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-267