Konica Minolta Magicolor 3300 Service Manual page 321

Removal
1) Remove the FUSER ASSY. (RRP8.1)
2) Remove the BTR UNIT ASSY. (RRP8.4)
3) Remove the COVER TOP MAIN. (RRP1.4)
4) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
5) Remove the COVER MSI. (RRP1.11)
6) Remove the TRAY ASSY BASE. (RRP1.12)
7) Remove the COVER ASSY FRONT. (RRP1.13)
8) Remove the COVER ASSY FRONT IN. (RRP1.10)
9) Remove the COVER SIDE L. (RRP1.14)
10) Remove the COVER SIDE R. (RRP1.9)
11) Remove the HOLDER ASSY TONER HBN UNIT. (RRP10.1)
12) Remove the HOLDER ASSY TONER HBN. (RRP10.2, 3, 4, 5)
13) Release the hooks at 2 positions securing the ACTUATOR TCRU ASSY to the HOLDER ASSY
TONER HBN (PL10.1.1, 2, 3, 4) with a mini screwdriver.
14) Remove the ACTUATOR TCRU ASSY from the HOLDER ASSY TONER HBN.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-321