Konica Minolta Magicolor 3300 Service Manual page 124

Set respective items displayed and click the [Print Start] button, and the printing will start under the set
conditions. Parameter setting items are as listed below.
Setting items
Input
(Paper trays)
Read media surf
Print Mode
Transfer Current
Resolution
Image
(Print image)
Media
(Paper type)
User size
Universal size
Printing setting
number of sheets
2-124
Tray1/Tray2/Tray3/MSI
Paper size set in each tray is detected automatically and displayed.
The state of each tray is also displayed.
Paper empty / Paper near empty / Upper Cassette Detached
If MSI is selected, select the paper size from the pull-down menu (give
below):
Monarch / Postcard / COM-10 / DL / Statement / A5 / C5 / B5 / Executive /
Letter / A4 / Legal13 / Legal14 / Universal size
A click of this button detects and displays the paper kind of MSI.
Unknown [no paper] / Rough[Plain] / Glossy[Coated] / Film[Transparency]
Duplex / Simplex
High / Low
1200 dpi / 600 dpi
None (white paper)/Test Print (IOT built-in pattern)
Set the type of paper.
Plain paper-L / Heavier paper-L / Heavier paper-H / Envelope / Postcard /
Transparency(=OHP)/ Label-H / Plain paper-L High Gloss / Label-L /
Heavier paper-L Back Face / Heavier paper-H Back Face / Envelope Back
Face / Postcard Back Face / Plain paper-H / Plain paper-H High Gloss /
Plain paper-L Super High Gloss / Plain paper-H Super High Gloss /
Heavier paper-L Super High Gloss / Heavier paper-H Super High Gloss /
Envelope Super High Gloss / Postcard Super High Gloss /
Transparency(=OHP) Super High Gloss / Label-H Super High Gloss /
Label-L Super High Gloss / Heavier paper-L Super High Gloss Back Face
/ Heavier paper-H Super High Gloss Back Face / Envelope Super High
Gloss Back Face / Postcard Super High Gloss Back Face / Plainpaper-L
Back Face /Plainpaper-L High Gloss Back Face /Plainpaper-L Super High
Gloss Back Face
If a User size check box is checked, automatic detection of paper size will
become invalid and the paper size chosen from the pull down menu (the
following item) will become effective.
Monarch / Postcard / COM-10 / DL / Statement / A5 / C5 / B5 / Executive /
Letter / A4 / Legal13 / Legal14 / Universal size
Moreover, setting up Width (paper width) and Length (paper length)
numerically has come out for every paper size. The set-up value is written
in NVM, and when the paper size is chosen next time, it is read.
Paper size is chosen from a pull down menu (the following item) when
MSI is chosen by Input.
Monarch / Postcard / COM-10 / DL / Statement / A5 / C5 / B5 / Executive /
Letter / A4 / Legal13 / Legal14 / Universal size
When paper size is set as Universal size, Width (paper width) and Length
(paper length) are set up numerically.
Set the print count.
Description