Konica Minolta Magicolor 3300 Service Manual page 251

Konica minolta magicolor 3300 laser printer service manual

Hide thumbs Also See for Magicolor 3300:

Table of Contents

Remove the COVER ASSY FRONT HEAD. (RRP1.2)

Remove the ACTUATOR FULL. (RRP6.3)

Remove the connector (P/J134) on the SENSOR PHOTO: FULL STACK from top portion of the

CHUTE ASSY OUT (PL6.1.1) of the printer.

Release the hooks at 3 positions securing the SENSOR PHOTO: FULL STACK to the CHUTE ASSY

Remove the SENSOR PHOTO:FULL STACK from the CHUTE ASSY OUT.

Replace the components in the reverse order of removal.

Chapter 3 Removal and Replacement Procedures

Troubleshooting