Konica Minolta Magicolor 3300 Service Manual page 136

2.7.8 Read Slave
[Steps]
1) Press the [Read] button on the screen where the [Slave] tab is selected.
2) The contents of Slave are displayed.
2.7.9 Initialize Slave
The data of Slave is initialized.
[Steps]
1) Click the [Initialize Slave] button, and the following screen will appear.
2) Click the [Yes] button to initialize Slave.
3) The message is displayed that initialization of Slave is completed.
Successful termination: Initialization of Slave was completed.
Unsuccessful termination:Initialization of Slave was not completed.
2-136