Removal
1)
Remove the CHUTE ASSY REGI. (RRP9.3)
2)
Remove the connector (P/J19) of the CLUTCH TURN (PL4.1.9) from on the PWBA MCU HBN
(PL12.1.1) of the printer.
3)
Remove 3 screws securing the HOUSING ASSY RETARD to the printer.
4)
Remove the HOUSING ASSY RETARD from the printer.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-223