Connector [P (Plug) / J (Jack)]; List Of P/J - Konica Minolta Magicolor 3300 Service Manual

1. Connector [P (plug) / J (jack)]

1.1 List of P/J

P/J Coordinates
1 I-37
11 J-43
12 I-43
13 H-43
14 H-37
14 I-37
15 H-43
18 H-43
19 H-44
21 I-43
22 J-43
23 I-43
24 H-43
27 H-37
30 H-43
31 J-43
32 H-43
34 H-42
35 H-43
41 E-18
42 E-17
47 E-18
48 D-18
49 D-17
50 E-18
51 E-16
52 D-18
60 E-17
61 E-17
71 B-32
131 B-7
132 C-9
133 D-8
134 D-6
135 C-9
Connects PWBA Font Card and Controller Board
Connects PWBA MCU HBN and PWBA DRV HBN
Connects PWBA MCU HBN and PWBA DRV HBN
Connects PWBA MCU HBN, S-HVPS, FSR3(FSR32) Harness Assembly, Front 2
Harness Assembly and ADC Harness Assembly
Connects PWBA MCU HBN and Controller Board
Connects Controller Board and PWBA Font Card
Connects PWBA MCU HBN and ROS Assembly
Connects PWBA MCU HBN and REGI Chute Assembly (REGI Clutch, REGI
Sensor)
Connects PWBA MCU HBN and Retard Housing Assembly (TURN Clutch)
Connects PWBA MCU HBN and OPFREC Harness Assembly
Connects PWBA MCU HBN and OPEPANE BS Harness Assembly
Connects PWBA MCU HBN and LVPS STD Assembly
Connects PWBA MCU HBN, FSR3(FSR32) Harness Assembly and TMPA Harness
Assembly
Connects Controller Board and PWBA MCU HBN
Flash-write
Test-print
Connects PWBA MCU HBN and OHP Sensor
Connects PWBA MCU HBN and RFID2 Harness Assembly
Not Connects
Connects PWBA DRV HBN and PWBA MCU HBN
Connects PWBA DRV HBN and PWBA MCU HBN
Connects PWBA DRV HBN, Pick Up Assembly (No Paper Sensor, Low Paper
Sensor, Solenoid Feed, Clutch Assembly Turn) and Switch Assembly Size
Connects PWBA DRV HBN and Main Drive Assembly
Connects PWBA DRV HBN and DEVE Drive Assembly
Connects PWBA DRV HBN, Chute Assembly Exit (Motor Assembly DUP) and
Cover Assembly Front Head (Fan Fuser)
Connects PWBA DRV HBN, Holder TCRU Assembly (No Toner Sensor, TNR Motor)
and PWBA CRUM Reader
Connects PWBA DRV HBN and Chute Assembly IN (Fuser Drive Assembly)
Connects PWBA DRV HBN and LVPS STD Assembly
Connects PWBA DRV HBN and LVPS STD Assembly
Connects EEPROM Harness Assembly and Plate Assembly Dispenser L (CONN
Assembly CRUM MC)
Connects Chute Assembly Exit (Motor Assembly DUP) and PWBA DRV HBN
Connects Chute Assembly Out (Solenoid Feed MSI) and Front 1A Harness
Assembly
Connects Chute Assembly Out (DUP JAM Sensor) and Front 1A Harness Assembly
Connects Chute Assembly Out (Full Stack Sensor) and Front 1A Harness Assembly
Connects Chute Assembly Out (MSI No Paper Sensor) and Front 1A Harness
Assembly
Chapter 4 Plug/Jack (P/J) Connector Locations
Remarks
4-361