Konica Minolta Magicolor 3300 Service Manual page 331
Konica minolta magicolor 3300 laser printer service manual
Hide thumbs
Also See for Magicolor 3300:
- User manual (198 pages) ,
- Service manual (172 pages) ,
- Installation manual (39 pages)
Table of Contents
Advertisement
Figure: LEVER DRUM:L Replacement
Removal
1)
Remove the COVER TOP MAIN. (RRP1.4)
2)
Remove the COVER ASSY FRONT HEAD. (RRP1.2)
3)
Remove the COVER MSI. (RRP1.11)
4)
Remove the TRAY ASSY BASE. (RRP1.12)
5)
Remove the COVER ASSY FRONT. (RRP1.13)
6)
Remove the COVER ASSY FRONT IN. (RRP1.10)
7)
Remove the COVER SIDE L. (RRP1.14)
8)
Remove the COVER ASSY TOP PHD. (RRP1.5)
9)
Remove the LINK:L. (RRP1.7)
10) Remove the HSG ASSY BIAS. (RRP9.2)
11) Remove 4 screws securing the PLATE LEVER L (PL11.1.1) from the left side surface of the printer.
12) Remove the PLATE LEVER L from the printer.
13) Release the hook of the SPRING LEVER 30N (PL11.1.5) hitched over the convex portion of the 4
LEVER DRUM from the left side surface of the printer.
14) Remove the LINK LEVER L (PL11.1.3) from the printer together with the SPRING LEVER:30N
15) Remove the LEVER DRUM:L from the printer.
Replacement
Replace the components in the reverse order of removal.
In replacing the LINK LEVER L (PL11.1.3), align the SPRING IDT L (PL11.1.17) and the
bottom of LINK LEVER L with the positions shown in the figure (LEVER DRUM:L
Replacement).
Chapter 3 Removal and Replacement Procedures
3-331
Advertisement
Table of Contents
Troubleshooting
