Removal And Replacement Procedures; Before Starting Service Work - Konica Minolta Magicolor 3300 Service Manual

1. Removal and Replacement Procedures

Parts removal and replacement procedures are described in major 12 items which correspond to
classification of parts list.
RRP 1
RRP 2
RRP 3
RRP 4
RRP 5
RRP 6
RRP 7
RRP 8
RRP 9
RRP 10
RRP 11
RRP 12
Parts are controlled as spare parts. When servicing for parts for which no procedures
are described, observe their assembling condition before starting the service.
For optional parts, refer to the manual for them.
Though the optional parts are assumed to be removed, they may not be removed if not
required for the purpose of service operation.

1.1 Before starting service work

Turn the power OFF and remove the power cord from the electric outlet.
Remove the PHD ASSY PKG (PL9.1.3) before starting the disassembling process.
Remove the TCRU ASSY as necessary, and perform disassembly process.
When performing service operation for parts around the FUSER ASSY, start the service after the
FUSER ASSY and parts around it have cooled down.
Do not give forcible power to prevent damage of parts or functions.
Since a wide variety of screws are used, be careful not to mistake their positions, to prevent crushing
of the screw holes or other troubles.
Wear a wrist band or the like as far as possible to remove static electricity of the human body.
COVERS
PAPER CASSETTE
PAPER FEEDER
HOUSING ASSY RETARD
CHUTE ASSY IN
CHUTE ASSY OUT
CHUTE ASSY EXIT
BTR ASSY & FUSER
XEROGRAPHICS
TCRU ASSY
FRAME & DRIVE
ELECTRICAL
Chapter 3 Removal and Replacement Procedures
3-143