Paper Output Tray; Output Tray Selected; Duplex Printing - Ricoh B051 Service Manual

CONTROLLER FUNCTIONS

4.3.6 PAPER OUTPUT TRAY

The default paper output tray for each application (copy/fax/printer) can be selected
using the System Settings menu in the user tools. (User Tools/ System Settings/
General Features)
If a print job does not specify an output tray or if the driver specifies the default tray,
the default paper output tray is used.

Output Tray Selected

• If an output tray is specified by the driver, it overrides the default tray setting in
the user tools.
• If the machine cannot print to the selected output tray, it prints to the default
paper output tray.
• If the mailbox unit is installed, paper larger than B4 cannot be printed to the
standard (internal) tray.
• If paper overflow is detected at the selected output tray, the controller stops
printing until the overflow detector goes off.

4.3.7 DUPLEX PRINTING

Duplex printing is not available with all paper sizes. If a job specifies duplex printing
but the paper size to be used cannot be used by the duplex unit, the job will be
printed single-sided.
• When the by-pass feeder is selected as the paper source, duplex printing is
automatically disabled.
B463/B529
CÓPIA NÃO CONTROLADA
44
CÓPIA NÃO CONTROLADA
Rev. 05/2003
SM