Waypoints; Marking A Position - Standard Horizon GX2200 Owner's Manual

14 WAYPOINTS

The GX2200 is capable of storing up to 100 waypoints and navigating to
them using the compass page.
In addition DSC distress calls with position or a position received from anoth-
er DSC radio using DSC polling can be navigated to.

14.1 MARKING A POSITION

This feature allows the radio to mark the current position of the vessel.
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " WAYPOINT
SETUP ".
3. Press the
" WAYPOINT DIRECTORY " with the CH knob.
4. Press the
POSITION " with the CH knob.
5. Press the
waypoint name by rotating the CH knob to
select the first letter.
6. Press the
letter and to move to the second letter in
the name.
7. Repeat step 5 and 6 until the name is
shown. Press the
letter if needed.
8. Press and hold the
memory.
9. Press the
One of the soft keys (refer to section "10.10 SOFT KEYS") may be
assigned to
Page 116
key until " Setup
CALL
MENU
soft key, then select
soft key, then select " MARK
soft key, then enter the
soft key to store the first
soft key to skip a
soft key two times to save the waypoint into
soft key three times to return to radio operation.
NOTE
and when pressed will bring up the menu above.
-Waypoint Directry-
MARK POSITION
Add
Edit
Delete
-Waypoint Input-
WPT Name:WPT 001
SELECT
Position: -- --.---_
-Waypoint Input-
--- --.---_
WPT Name:Fishing PT
QUIT
ENT BACK
Position: 33 36.520N
118 10.120W
ENT BACK
QUIT
QUIT
GX2200