Setting Up The Individual Call Reply - Standard Horizon GX2200 Owner's Manual

If a mistake was made entering in the name repeat pressing the
soft key until the wrong character is selected, then rotate the CH knob to
correct the entry.
9. After the eleventh letter or space has been entered, press and hold the
soft key to advance to the MMSI number entry.
10. Rotate the CH knob to scroll through
numbers, 0-9. To enter the desired number
and move one space to the right by pressing
the soft key. Repeat this procedure
until all nine space of the MMSI number are
entered.
If a mistake was made entering in the MMSI number repeat pressing the
soft key until the wrong number is selected, then rotate the CH
knob to correct the entry.
11. To store the data entered, press and hold the
12. To enter another individual address, repeat steps 5 through 11.
13. Press the

9.5.2 Setting up the Individual Call Reply

This menu item sets up the radio to automatically (default setting) or manu-
ally respond to a DSC individual call requesting you to switch to a working
channel for voice communications. When "Manual" is selected the MMSI of
the calling vessel is shown allowing you to see who is calling. This function is
similar to caller id on a cellular phone.
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " DSC SETUP "
menu.
3. Press the
" INDIVIDUAL REPLY " with the CH knob.
4. Press the
5. Rotate the CH knob to select " AUTOMATIC "
or " MANUAL ".
6. Press the
selected setting.
7. Press the
GX2200
soft key three times to return to radio operation.
key until " Setup
CALL
MENU
soft key, then select
soft key.
soft key to store the
soft key two times to return to radio operation.
-Individual Directory-
Individual Name
Horizon
ID:123456789
ENT BACK
soft key.
-DSC Setup-
Individual Directory
INDIVIDUAL REPLY
Individual Ack
Individual Ring
Group Directory
-Individual Reply-
Position Reply
AUTOMATIC
SELECT Manual QUIT
ENT
QUIT
QUIT
Page 59