Waypoints; Marking A Position - Standard Horizon GX2000E Owner's Manual

14 WAYPOINTS

The GX2000E/GX2100E when connected to a GPS or Chartplotter is capable
of storing up to 100 waypoints and navigating to them using the compass
page.
In addition DSC distress calls with position or a position received from a an-
other DSC radio using DSC polling can be navigated to.

14.1 MARKING A POSITION

This feature allows the radio to mark the current
position of the vessel.
1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu" appears.
2. Rotate the CHANNEL knob to select "WAYPOINT
SETUP".
3. Press the [ SELECT ] soft key, then select
"WAYPOINT DIRECTORY" with the CHANNEL
4. Press the [ SELECT ] soft key, then select
"MARK POSITION" with the CHANNEL knob.
5. Press the [ SELECT ] soft key, then enter the
Waypoint Name, by rotating the CHANNEL
knob to select the first letter.
6. Press the [ ENT ] soft key to store the first let-
ter and to move to the second letter in the name.
7. Repeat step 5 and 6 until the name is shown. Press
the [ ENT ] soft key to skip a letter if needed.
8. Press and hold the [ ENT ] soft key two times to save the waypoint into
memory.
9. Press the [ QUIT ] soft key several times to return to radio operation.
GX2000E/GX2100E
knob.
Page 107