Station Name - Standard Horizon GX2200 Owner's Manual

10.9 STATION NAME

This function allows you to change the name of the radio or second station
microphone.
Example: "Radio - Cabin", "RAM1 - Flybridge"
1. Press and hold the
appears.
2. Rotate the CH knob to select " GENERAL SETUP "
menu.
3. Press the
knob to select " STATION NAME ".
4. Press the
5. With the second station microphone connected,
rotate the CH knob to select the unit (" Radio " or
" RAM1 ") to be named, then press the
key.
6. Rotate the CH knob to scroll through the first
letter of the new station name.
7. Press the
in the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to eight characters, if you do not use all
eight characters press the
This method can also be used to enter a blank space in the name. If a
mistake was made entering in the name repeatedly press the
soft key until the wrong character is selected, then rotate the CH knob to
correct the entry.
9. Press and hold the
10. If you want to enter the name of the other connected RAM3 or radio,
repeat steps 5 through 9.
11. Press the
Page 96
key until " Setup Menu "
CALL
MENU
soft key, then rotate the CH
soft key.
soft key to store the first letter
soft key to enter the name.
soft key three times to return to radio operation.
soft
soft key to move to the next space.
-Station Name-
Select Unit
Radio
Unit Name
RADIO
QUIT
ENT
-Station Name-
Select Unit
Radio
Unit Name
Cabin
ENT BACK QUIT
GX2200