Waypoints; Storing Your Current Position Into The Waypoints - Standard Horizon HX851E Owner's Manual

12 WAYPOINTS

The HX851E is capable of storing up to 200 waypoints and navigating to them
using the compass page.
In addition DSC distress calls with position or a position received from another
DSC radio using DSC polling can be navigated to.

12.1 STORING YOUR CURRENT POSITION INTO THE WAYPOINTS

1. Press and hold down the [ CALL ( ENT ) MENU ]
key until "Setup Menu" appears.
2. Press the [
menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Waypoint Directory" with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Select "Mark Position" with the [ ] / [ ] key, press
the [ CALL ( ENT ) MENU ] key.
6. Press the [ ] / [ ] key to select the first letter of
the Waypoint Name you want to reference in the direc-
tory.
7. Press the [ CALL ( ENT ) MENU ] key to store the first let-
ter and to move to the second letter in the name.
8. Repeat step 6 and 7 until the name is shown. The name
can consist of up to 11 characters. If you do not use all
11 characters.
9. When you have completed the name entry, press and
hold the [ CALL ( ENT ) MENU ] key several times until
the "Waypoint Setup" menu appears.
Page 76
] key to select "Waypoint Setup"
HX851E