11.8 SCRAMBLER SETUP
Operates only when the optional CVS2500A is installed. This menu
will not appear unless a CVS2500A is installed.
1. Press and hold the
appears.
2. Rotate the CH knob to select " CH FUNCTION
SETUP ".
3. Press the
with the CH knob.
4. Press the
5. Rotate the CH knob to select the channel to be
scrambled and press the
6. Rotate the CH knob to select the scrambler code.
The scrambler code can be set from " 0 " to " 3 " and
" Off ". When " Off " is selected the voice scrambler
is disabled.
7. Press the
code.
8. Repeat steps 5 through 7 to set other channels.
9. Press the
GX2200
NOTE
key until " Setup Menu "
CALL
MENU
soft key, then select " SCRAMBLER "
soft key.
soft key.
soft key to store the selected
soft key three times to return to radio operation.
Page 103