Soft Keys - Standard Horizon GX2200 Owner's Manual

10.10 SOFT KEYS

This menu item allows selection of the number of soft keys, soft key selection
and how long the display will show the soft key icon after a soft key is pressed.
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " GENERAL
SETUP " menu.
3. Press the
CH knob to select " SOFT KEYS ".
4. Press the
CH knob to " NUMBER OF SOFT KEYS ".
5. Press the
CH knob to select the number of soft keys
( 3 through 10 ).
6. Press the
CH knob to " KEY ASSIGNMENT " (to change
the use of selected soft keys).
7. Press the
8. Rotate the CH knob to select the key (" KEY1 ",
" KEY2 ", or " KEY3 ") to be programmed, and
press the
9. Rotate the CH knob to select the new func-
tion to be assigned, and press the
soft key. Available functions are listed in the
next page. Repeat steps 8 and 9 to program
the other soft keys.
10. Press the
knob to select " KEY TIMER " (selects how
long the soft key icon will be shown on the
display after a soft key is pressed; default
is 5 seconds). Then, press the
key.
11. Rotate the CH knob to select the time.
12. Press the
13. Press the
GX2200
key until " Setup
CALL
MENU
soft key, then rotate the
soft key, then rotate the
soft key, then rotate the
soft key, then rotate the
soft key.
soft key.
key, then rotate the CH
soft key to store the selected setting.
soft key three times to return to radio operation.
-Number of Soft Keys-
3
4
5
6
7
8
ENT
[KEY 1]:SCAN
[Key 2]:DW
[Key 3]:WX
SELECT
soft
QUIT
-Assignment-
QUIT
Page 97