Waypoints; Storing Waypoints - Standard Horizon HX851 Owner's Manual

12 WAYPOINTS

The HX851 is capable of storing up to 200 waypoints and navigating to them
using the compass page.
In addition DSC distress calls with position or a position received from another
DSC radio using DSC polling can be navigated to.

12.1 STORING WAYPOINTS

1. Press and hold down the [ CALL ( ENT ) MENU ]
key until "Setup Menu" appears.
2. Press the [
menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Waypoint Directory" with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Select "Add" with the [
[ CALL ( ENT ) MENU ] key.
6. Press the [ ] / [ ] key to select the first letter of
the Waypoint Name you want to reference in the
directory.
7. Press the [ CALL ( ENT ) MENU ] key to store the
first letter and to move to the second letter in the
name.
8. Repeat step 6 and 7 until the name is shown. Press the [ CALL ( ENT ) MENU ]
key to skip a letter if needed.
9. Press the [
latitude.
10. Enter the coordinates of the waypoint POSITION, by
pressing the [ ] / [ ] key to select the first digit in the
Latitude.
11. Press the [ CALL ( ENT ) MENU ] key to store the first
number and to move to the second number in the po-
sition.
12. Repeat step 10 and 11 until the latitude is shown in-
clude N or S in the last digit.
13. Press the [ CALL ( ENT ) MENU ] key until the first digit of
the Longitude is blinking.
14. Press the [ ] / [ ] key to select the first digit in the
Longitude.
15. Press the [ CALL ( ENT ) MENU ] key to store the first number and to move to
the second number in the position.
HX851
] key to select "Waypoint Setup"
] / [
] / [ ] key to skip the ID: entry and to the first digit of the
] key, press the
Page 81