Standard Horizon GX2200 Owner's Manual page 61

7. When an individual call acknowledgment is received, the established
channel is automatically changed to the channel which is selected on
step 5 above and a ringing tone sounds.
8. Press the
channel to make sure it is not busy, then
press the microphone's PTT switch and talk
into the microphone to the other vessel.
Individual Call by Manually Entering a MMSI
You may enter an MMSI number manually to contact without storing it in the
individual directory.
1. Press the
appear.
2. Rotate the CH knob to select " INDIVIDUAL ".
(To cancel, press the
3. Press the
will beep, and the last individual calls will
appear.
4. Press the
MANUAL
" " with the CH knob.
5. Press the
6. Rotate the CH knob to select the first
number of the MMSI which you want to
contact, then press the
step to the next number.
7. Repeat step 6 to set the MMSI number (nine digits).
If a mistake was made entering in the MMSI number, repeat pressing
the key until the wrong number is selected, then rotate the CH
knob to correct the entry.
8. When finished entering the MMSI number,
press and hold the
9. Rotate the CH knob to select the operating
channel you want to communicate on, then
press the
10. Press the
individual DSC signal.
11. When an individual call acknowledgment is received, the established
channel is automatically changed to the channel which is selected on
step 9 above and a ringing tone sounds.
GX2200
soft key to listen to the
key. The " DSC Menu " will
CALL
MENU
soft key. The transceiver
soft key, then select
soft key.
soft key.
soft key.
soft key to transmit the
soft key.)
soft key to
-Individual Call-
Input MMSI
ID:---------
SELECT BACK
-Individual Call-
Input MMSI
ID:345678901
SELECT BACK QUIT
-Individual Call-
Name:
ID:345678901
Category:Routine
CH: 08
Transmit?
YES
QUIT
QUIT
Page 61