Fog Alert Tone Frequency - Standard Horizon GX2200 Owner's Manual

10.8 FOG ALERT TONE FREQUENCY

The function allows the radio to be setup to send the proper fog frequency
which is dependant on vessel size, shown below:
70 - 200Hz: Vessel that are 660 feet (200 meters) or more in length
130 - 350Hz: Vessel that are 247.5 feet (75 meters) or more but less than
660 feet (200 meters) in length
250 - 525Hz: Vessel that are 66 feet (20 meters) or more but less than 247.5
feet (75 meters) in length
250 - 525Hz: Vessel that are 39.6 feet (12 meters) or more but less than 66
feet (20 meters) in length
1. Press and hold the
appears.
2. Rotate the CH knob to select " GENERAL SETUP "
menu.
3. Press the
knob to select " FOG FREQUENCY ".
4. Press the
5. Rotate the CH knob to select the desired tone
frequency.
6. Press the
level.
7. Press the
radio operation.
By default the radio Fog frequency is set to 400Hz. In most cases
this frequency should not be changed unless the vessel is very large.
GX2200
key until " Setup Menu "
CALL
MENU
soft key, then rotate the CH
soft key.
soft key to store the selected
soft key two times to return to
NOTE
Page 95