Auto Pos Polling; Setting Up The Polling Time Interval; Selecting Stations To Be Automatically Polled (Tracked) - Standard Horizon GX2200 Owner's Manual

9.10 AUTO POS POLLING

The GX2200 has the capability to automatically track four stations
programmed into the individual directory.
The following procedure allows the time interval between position requests
to be setup.

9.10.1 Setting up the Polling Time Interval

1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " DSC SETUP "
menu.
3. Press the
POS INTERVAL " with the CH knob.
4. Press the
5. Rotate the CH knob to select the desired
interval time (30 second, 1, 2, 3, 4, 5, 10,
20, 30 and 40 minutes) and press the
soft key.
6. Press the
return to radio operation.

9.10.2 Selecting Stations to be Automatically Polled (Tracked)

The radio uses the individual directory to select stations. Refer to
section "9.5.1 Setting up the Individual / Position Call Directory"
and to enter MMSI of stations you want to poll before proceeding.
1. Press the
appear.
2. Rotate the CH knob to select " AUTO POS
POLLING ", then press the
3. Rotate the CH knob to select the " SELECT
ADDRESS ", then press the
4. The radio will show 4 calling stations to be
selected, select " CALL 1 " and press the
soft key.
GX2200
key until " Setup
CALL
MENU
soft key, then select " AUTO
soft key.
soft key two times to
key. The " DSC Menu " will
CALL
MENU
NOTE
soft key.
soft key.
-Auto POS Polling-
Activation
SELECT ADDRESS
SELECT
-Auto POS Interval-
30 sec
1 MIN
2 min
3 min
4 min
5 min
ENT QUIT
-Auto POS Polling-
CALL 1:
Call 2:
QUIT
Call 3:
Call 4:
QUIT
SELECT CALL
Page 81