Pinning; Time Offset; Time Area; Time Display - Standard Horizon GX2200 Owner's Manual

15.3 PINNING

This selection is used to enable or disable position updates when the vessel
is not underway. The default setting is "On".
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " GPS SETUP "
menu.
3. Press the
" PINNING " with the CH knob.
4. Press the
5. Rotate the CH knob to select " ON " or " OFF ".
On : W h e n p i n n i n g i s t u r n e d o n , t h e
GX2200 will not update its position
unless the vessel travels over 10Ft.
Off : W h e n t h e v e s s e l i s u n d e r w a y o r
stopped, the GX2200 continuously
updates its position (unless transmit-
ting). This improves accuracy of the
position fix.
6. Press the
7. Press the

15.4 TIME OFFSET

Sets the local time offset between UTC (Universal Time Coordinated) and
local time shown on the display. The offset is added or subtracted from the
time received from the GPS or chart plotter. Time is only displayed when a
GPS or chart plotter is connected.
Refer to section "6.7 CHANGING THE GPS TIME" for details.

15.5 TIME AREA

This menu selection allows the radio to show UTC time or local time with the
offset.
Refer to section "6.8 CHANGING THE TIME LOCATION" for details.

15.6 TIME DISPLAY

This menu selection allows the radio to show time in 12-hour or 24-hour
format.
Refer to section "6.9 CHANGING THE TIME FORMAT" for details.
Page 122
key until " Setup
CALL
MENU
soft key, then select
soft key.
soft key to save the new setting.
soft key twice to return to radio operation.
GX2200