Demo Mode - Standard Horizon GX2200 Owner's Manual

8.14 DEMO MODE

This mode is used by Standard Horizon sales persons and dealers to
demonstrate radio, DSC and AIS functions. Demo mode allows latitude,
longitude and time to be entered to simulate radio displays. When the
demo mode is enabled, the radio display will automatically switch from the
NORMAL, COMPASS, AIS and WAYPOINT displays.
When demo mode is enabled and the radio is turned off and back on
the radio will still be in the demo mode.
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " DEMO MODE ".
3. Press the
INPUT " with the CH knob.
4. Press the
5. Enter the latitude/longitude of your vessel
and your local UTC time in the 24-hour
notation by the CH knob. Rotate the CH
knob to select the number and press the
soft key to move the cursor to the
next character. You may backspace the
cursor by pressing the
you make a mistake.
6. To store the data entered, press and hold
the soft key.
7. Rotate the CH knob to " DEMO START " and
press the
8. Select " S T A R T " using the CH knob and
press the
To stop the demo mode, select " STOP " in step 8 above.
Page 48
NOTE
key until " Setup
CALL
MENU
soft key, then select " POS
soft key.
soft key, if
soft key.
soft key.
NOTE
-POS/POS Time Input-
Position: 33 37.120
118 09.580
POS Time:10:00[UTC]
QUIT
ENT BACK
GX2200
N
W