Programming Scan Memory; Memory Scanning (M-Scan) - Standard Horizon GX2200 Owner's Manual

8.9.2 Programming Scan Memory

1. Press and hold the
appears.
2. Rotate the CH knob to select " CH FUNCTION
SETUP ".
3. Press the
knob to select " SCAN MEMORY CH ".
4. Press the
5. Rotate the CH knob to select a desired channel to
be scanned, the press the
icon appears on the display, which indicates the
channel has been selected to the scan memory.
6. Repeat step 5 for all the desired channels to be
scanned.
7. To DELETE a channel from the list, select the
channel then press the
icon disappears from the display.
8. When you have completed your selection, press the
three times to return to radio operation.

8.9.3 Memory Scanning (M-SCAN)

1. Adjust the SQL knob until background noise disappears.
2. Press one of the soft key, then press the
soft key. " M-SCAN " appears on the display. Scan-
ning will proceed from the lowest to the highest
programmed channel number and preset channel
(described in the next section) and will stop on a
channel when a transmission is received.
The channel number will blink during reception.
3. To stop scanning, press the
Page 40
key until " Setup Menu "
CALL
MENU
soft key, then rotate the CH
soft key.
or
16
9
soft key. " MEM "
soft key. " MEM "
key.
CLR
WX
soft key
GX2200